Werbung
1
4
7
8
2
5
8
English
G E T T I N G T H E B E S T R E S U LT S
Use the nozzles as follows:
Carpets:
position (1). Reduce the suction power for small carpets.
Hard floors:
position (2).
3
Upholstered furniture:
Curtains, lightweight fabrics, etc:
nozzle/brush (4). Reduce suction power if necessary.
Frames, bookshelves, etc:
Crevices, corners, etc:
Places difficult to access:
nozzle (6).
For e.g. DIY work:
the place where you are to drill. Then connect the hose.
Using the turbo nozzle:
8
Attach the nozzle to the tube.
9
Adjust the suction power by opening or closing the air vent.
Note. Do not use the turbo nozzle on skin rugs, rugs with
6
long fringes or pile depth exceeding 15 mm.To avoid damage
to the carpet, do not keep the nozzle stationary whilst the
brush is rotating. Do not pass the nozzle across electric cables,
and be sure to switch off the nozzle immediately after use.
9
Use the carpet/hard floor nozzle with the lever in
Use the carpet/hard floor nozzle with the lever in
Use the combination nozzle/brush (3).
Use the combination
Use the combination nozzle/brush (4).
Use the crevice nozzle (5).
Use the long, flexible crevice
Use the drill nozzle (7) by placing it over
Werbung
