Safety Instructions; Technical Data - Meec Tools 082002 Bedienungsanleitung

SAFETY INSTRUCTIONS

Tominimise the risk of injury everyone
who uses, installs, repairs, maintains,
changesparts or worksnearthis product
must read and understand
instructions before starting the work,
Alwayswear safetyglasses when working
with or carrying out maintenance on this
product.
Never use damaged or worn air hoses or
couplings.
Nevercarrythe productbythe powercord.
Maintain a firm footing and good
balance.Avoidoverreachingwhen
working with the product.
Air tools can vibrateduring use.Vibration,
repetitive movements and uncomfortable
posturescan causestrain on handsand
arms.Stopworking if youfeel any
discomfort, trembling or pain. Seek
medicaladvicebeforeresumingthe work.
Always turn off the air supply and
disconnectthe air supplyhosebefore
installation or performing any other work
on this product.
Maximum air pressure 3.4 bar.
Read the instructions.
Approvedin accordance with
the relevant
TECHNICAL DATA
Working pressure
DESCRIPTION
1. Paint outlet
2. Paintflow adjustment
these
directives.
max 3.4 bar
Paint inlet
3.
4 Compressedair intake
Controlfor adjustingthe paint pow
5.
FIG. 1
USE
Adjust the spray width and paint flow
before use.
Oil-basedpaints (suchas volatile paints)
and paints with medium to high
viscosity are recommended.
If the spray gun is used with water-
based paints, it must be cleaned with
water or a special detergent (acrylic).
Do not leave the spray gun in the
detergent for too long. Do not use
banana oil (isopentyl acetate) for
cleaning.
Only use the spray gun for its intended
purpose.
AIR SUPPLY REQUIREMENTS
Theworking pressureof the spraygun is max
3.4 bar. Higher pressure drastically reduces the
life span of the spraygun.
HOW TO USE
Connect the air hose to the compressed
air intake.
Connectthe paint containerto the paint
2.
inlet.
Press the control to the requireddepth
3.
and adjust the flow of paint asrequired.
The width is adjusted With the control and
the paint flow adjuster,
FIG. 2
7