Installing The Filter - Dreame R10 Pro Benutzerhandbuch

Installing the Filter

Insert the dried filter into the vacuum and press it down gently as shown.
•
Reinstall the dust cup securely.
•
Cleaning the Multi-Surface Brush
Turn the lock counterclockwise until it stops, then remove the roller from the
•
brush head.
Use scissors to cut away any hair or fibers tangled around the roller. Wipe dust
•
from the notches and transparent cover with a dry cloth or paper towel. Make
sure the roller is thoroughly dry before reassembly.
Rinse the brush roller with clean water until all debris is removed.
•
Stand the roller upright and allow it to dry completely for at least 24 hours.
•
18