Care & Maintenance - Dreame R10 Pro Benutzerhandbuch

Care & Maintenance
Tips:
Always use genuine replacement parts to keep your warranty valid.
•
If the filter or nozzle becomes clogged, the vacuum may stop working shortly
•
after powering on. Clear the blockage to restore functionality.
If the vacuum will not be used for an extended period, fully charge it, unplug the
•
charger, and store the vacuum in a cool, dry location out of direct sunlight. To
prevent over-discharging the battery, recharge the vacuum at least once every
three months.
Cleaning the Vacuum
Wipe the vacuum with a soft, dry cloth.
•
Cleaning the Dust Cup, Pre-Filter, and Cyclone Assembly
The vacuum's cleaning performance may be reduced if the dust cup is filled to the "MAX"
level. To maintain optimal performance, empty the dust cup regularly. Always
disconnect the vacuum from power before emptying the dust cup and avoid pressing
the power button during maintenance.
Press the dust cup bottom cover release button and empty the contents.
•
Push the dust cup release switch in the direction indicated by the arrow and
•
gently remove the dust cup from the vacuum.
Remove the pre-filter first. Then lift the cyclone assembly handle and rotate it
•
counterclockwise until it stops. Lift the handle to remove the cyclone assembly.
Wipe the dust cup with a soft, damp cloth. Ensure the cloth is thoroughly wrung
•
out before use.
Warning: Do not rinse the dust cup with water to avoid the risk of electric shock.
Rinse the cyclone assembly and pre-filter thoroughly with clean water. Allow both
•
components to air dry for at least 24 hours before reinstalling.
14