Dreame R10 Pro Benutzerhandbuch Seite 9

Wall Mount Installation Diagram
Attach the mounting template sticker to the wall. The bottom edge of the sticker
•
should be aligned horizontally and positioned approximately 107 cm from the
floor.
Using a power drill with an 8 mm drill bit, drill holes at the marked points on the
•
sticker. Then, insert wall plugs into each hole.
Align the holes in the wall mount with the drilled holes and secure it using the
•
included screws.
Note:
The wall mount is an optional accessory. Install it based on your personal needs
•
or available space.
Ensure the wall mount is installed on a cool, dry surface, ideally near a power
•
outlet.
Before drilling, confirm there are no electrical cables or water pipes behind the
•
wall to avoid damage or hazards.
9