Cleaning the Motorized Mini-Brush
Using a coin, turn the lock counterclockwise until it clicks to unlock.
•
Remove the brush roller, rinse it with clean water, and remove all debris.
•
Allow the roller to dry in a well-ventilated area for at least 24 hours.
•
Once dry, reinstall the brush roller by following the disassembly steps in reverse
•
order.
Battery Pack
The vacuum uses a removable rechargeable lithium-ion battery pack, which has a
limited number of recharge cycles. After prolonged use, the battery may no longer hold
a charge. This indicates that the battery has reached the end of its service life and needs
replacement.
Press the battery pack release button and slide the battery out to the right as
•
shown.
Insert a new battery pack into position.
•
20