VEVOR HJ-RB021 Bedienungsanleitung Seite 7

Maximum suitable width between the inner sides of the roof bars
* Total product length reduced by 190mm.
HJ-RB021-120CM
HJ-RB021-123CM
HJ-RB021-132CM
HJ-RB021-135CM
HJ-RB021-54"
1. First, use the key to open the out anti-theft cover, then use the hexagonal key
to tighten the screws in the out anti-theft cover to adjust the loading position, move
the adaptors left and right in the cross bar slot to the appropriate loading position,
and then tighten and fix the screws; Finally, close the out anti-theft lock.
2.Before and after each use, check to make sure that all hardware is tightly
secured.Regularly inspect for damage.If fraying or distortion is found,immediately
discontinue use.
Model
Inner sides of the roof bars
190 to 1010 mm
190 to 1040 mm
190 to 1130 mm
190 to 1160 mm
190 to 1180 mm