Changing Basic Settings For Temperatures And Times; Changing Basic Settings Of Temperatures; Changing Basic Settings Of Short Time Clocks - Salvis ProfiLine GN 2/1 Betriebsanleitung

5.7

Changing basic settings for temperatures and times

5.7.1

Changing basic settings of temperatures

With this function, the temperatures set at the works can be changed.
These settings remain stored even after the appliance has been switched on and off at the cus­
tomer's electrical main switch.
● The appliance must be switched off.
● Three dots glow on the display.
3 sec.
. Press the key "P"
. Within 3 seconds, press the key "1, 2, 3 or 4" the setting of which is to be changed.
-
● The temperature is shown on the display.
● The temperature display flashes.
3 sec.
. Within 3 seconds, press and hold the key "Up"
● First, the values are reduced or increased slowly, then rapidly. By pressing the key, the setting is
carried out in increments of 5.
3 sec.
. Press the key "P"
● The set temperature has been stored.
● Three dots glow on the display.
5.7.2

Changing basic settings of short time clocks

With this function, the times set at the works can be changed.
These settings remain stored even after the appliance has been switched on and off at the cus­
tomer's electrical main switch.
● The appliance must be switched off.
● Three dots glow on the display.
3 sec.
. Press the "START/STOP" key
. Within 3 seconds, press the key "1, 2, 3 or 4" the setting of which is to be changed.
-
● The time is shown on the display.
● The time display flashes.
3 sec.
. Within 3 seconds, press and hold the key "Up"
● First, the values are reduced or increased slowly, then rapidly. By pressing the key, the setting is
reduced or increased by one step respectively.
3 sec.
. Press the key "START/STOP"
● The set time has been stored.
● Three dots glow on the display.
within 3seconds.
within 3seconds.
or "Down" .
or "Down" .
en
39 / 76