VEVOR HJ-RB017 Bedienungsanleitung Seite 9

3. Compare whether the rubber sheet on the lock hook in the loading state is too
long; if it is too long, it will cause the lock hook to be unable to be tightened after
assembly, so the excess part should be shortened with scissors and reassembled.
4. Insert the sheet pull strip into the foot seat to the deepest position that can be
inserted manually, then flick the lock cover back and forth to tighten the hook.
(Note: Do not over-tighten the teeth on the steel sheet tie. Tighten both sides of the
bar to ensure the crossbar is properly centered and not too tight so as not to
damage the roof. )