VEVOR RP9513 Bedienungsanleitung Seite 7

4. To change direction, push the button at the top of the handle. The
direction of .R. for reverse and "F" for forward
5. The flow of air may be regulated by adjusting a flow valve at the base of
the handle.
DO NOT use any additional force upon the wrench in order to remove a
nut.
DO NOT allow the wrench to free run for an extended period of time, as
this will shorten its life.
Maintenance
WARNING: Disconnect wrench from air supply before changing
accessories, servicing or performing maintenance. Replace or repair
damaged parts. Use genuine parts only. Non-authorized parts may be
dangerous.
1. Lubricate the air wrench daily with a few drops of air tool oil dripped into
the air inlet
2. DO NOT use worn, or damaged sockets.
3. Loss of power or erratic action may be due to the following:
a) Excessive drain on the air line. Moisture or restriction in the air pipe.
Incorrect size or type of hose connectors. To remedy check the air
supply and follow instructions .
b) Grit or gum deposits in the wrench may also reduce performance. If
your model has an air strainer (located in the area of the air inlet), remove
the strainer and clean it..
4. When not in use, disconnect from air supply, clean wrench and store in
a safe, dry, childproof location.
Trouble Shooting
The following form lists the common operating system with problem and
solutions. Please read the form carefully and follow it.
WARNING: If any of the following symptoms appear during your
operating, stop using the tool immediately, or serious personal injury
could result. Only qualified persons or an authorized service center
can perform repairs or replacement of tool.
Disconnect tool from air supply before attempting repair or