VEVOR RP9513 Bedienungsanleitung Seite 4

5. Comply with UK safety certification.
6. Always ensure machine is switched off before connecting to air supply.
7. Disconnect any machine from the air supply before changing blades or
discs, and before servicing any type of machine.
8. Always keep your air tool clean and lubricated. Daily lubrication is
essential to avoid internal corrosion and possible failure.
9. Do not wear watches, rings bracelets or loose clothing when using air
tools.
10. Using only light weight coil hoses from a tool to the wall or compressor
coupling. Do not fit quick change couplings onto the machine as vibration
can cause the coupling to fail.
11. Do not overload the machine. Allow the tool to operate at its optimum
speed for maximum efficiency.
12. Do not increase the air pressure above the manufacturers
recommended level, as excessive overload can cause the machine casing
to split. Also this creates excessive wear on moving parts and possible
failure.
13. In the interests of safety and possible damage to the machine/operator,
always ensure that the machine has stopped before putting it down after
use.
14. Always ensure that the work piece is firmly secured leaving both hands
free to control the machine.
15. Always ensure that the accessories such as blades, discs, sockets, etc.
are designed for use with the machine. Also correctly and securely
fastened before connecting the machine to the air supply.