Cleaning, Maintenance And Storage; Transport - Murray Mu-Bat-Gt30-Kit Bedienungsanleitung Und Garantiekarte

User manual and warranty card

CLEANING, MAINTENANCE AND STORAGE

Attention! After finishing work, the device should be cleaned of sawdust, dust
and dust.
Attention! Always make sure that the appliance is switched off and has the battery
removed before carrying out any inspection or maintenance.
With a fine brush, brush or cloth, clean the housing from dust and clean the appliance with
compressed air.
It is acceptable to clean with a damp cloth, but only if the appliance immediately dries
immediately after this operation. Protect the metal parts with oil.
Clean the vents regularly with compressed dry air. Do not insert sharp objects into the vents.
When you are done, you must:
• Wipe the air vents and leave them free of dirt.
• Wipe the trimmer with a dry cloth.
• Do not leave the charger power cord bent.
Attention! Never use aggressive or corrosive cleaning detergents, as they can
damage the plastic parts of the appliance. Washing the trimmer with a jet of water is not
allowed, water can damage the electrical parts of the trimmer.
Cleaning agents and solvents such as gasoline, carbon tetrachloride, chlorinated cleaning
solvents, ammonia, and household detergents that contain ammonia can damage plastic
components.
Storage
Attention! Store the trimmer in a well-ventilated room in a dry, dust-free place.
Store only a working device; repair any faults before storage.
Preparing the battery for recycling
 Secure the battery terminal with strong insulating tape.
 ATTENTION! Do not attempt to destroy or disconnect the battery or remove any of its
components.
 Keep out of reach of children.
 Failure to follow these warnings could result in fire and/or serious injury.

TRANSPORT

When preparing the transport device:
• switch off the appliance, remove and secure the battery.
25
English