Vibration And Noise Reduction; Residual Risks - Parkside Pws 125 I9 Originalbetriebsanleitung

If the replacement of the supply cord
is necessary, this has to be done
by the manufacturer or his agent in
order to avoid a safety hazard.
˜ Vibration and noise
reduction
To reduce the impact of noise and
vibration emission, limit the time of
operation, use low-vibration and
low-noise operating modes as well as
wear personal protective equipment.
Take the following points into account
to minimise the vibration and noise
exposure risks:
Only use the product as intended by
its design and these instructions.
Ensure that the product is in good
condition and well maintained.
Use correct accessory tools for the
product and ensure they are in good
condition.
Keep tight grip on the handles/grip
surface.
Maintain this product in accordance
with these instructions and keep it
well lubricated where appropriate
Plan your work schedule to spread
any high vibration tool use across a
longer period of time.
˜
situations
Familiarise yourself with the use of this
product by means of this instruction
manual. Memorise the safety warnings
and follow them to the letter. This will
help to prevent risks and hazards.
Always be alert when using this
product, so that you can recognise
and handle risks early. Fast
intervention can prevent serious
injury and damage to property.
Switch the product o and
disconnect it from the mains if there
are malfunctions Have the product
checked by a uali ed professional
and repaired, if necessary, before
you operate it again.
˜ Residual risks
Even if you are operating this product
in accordance with all the safety
requirements, potential risks of injury
and damage remain. The following
dangers can arise in connection with the
structure and design of this product:
Health defects resulting from
vibration emission if the product is
being used over long periods of time
or not adequately managed and
properly maintained.
Injuries and damage to property due
to broken accessory tools or the
sudden impact of hidden objects
during use.
Danger of injury and property
damage caused by ying objects
NOTE
This product produces an
u
electromagnetic eld during
operation This eld may under
some circumstances interfere with
active or passive medical implants!
To reduce the risk of serious
or fatal injury, we recommend
persons with medical implants
to consult their doctor and the
medical implant manufacturer
before operating this product!
GB/IE 41