Liquid Crystal Display; Radio Operations - Peiying Basic Py6688 Bedienungsanleitung

Peiying
SELECT MODE
By pressing this button(5) to go to different function
- Tuner (radio)
- CD (MP3 CD)
to go to this mode must be have a CD in.
- Memory Card
to go to this mode must be have a Memory Card in.
- USB
to go to this mode USB device must be connected.
- AUX in put
DISPLAY
Press DISP button (6) to operate as the conversion of each display mode as follow:
- Time is displayed for 5sec when DISP key is pressed, and it returns to its
previous display ( Folder, File name...) unless DISP key is pressed again.
3) From the clock mode, when DISP Key is pressed for longer than Isec,
clock mode switches
begins flashing. At this time clock can be changed by pressing (+/ ) ,
or the ENCODER
LIQUID CRYSTAL
Exhibit current frequency
FLASHING
If the front panel does not install in the
RADIO OPERATIONS
BAND SELECTION
At tuner mode, press BAND button (10) to select the desired band. The
reception band will change in the following order:
FMI FM2—
or:
FMI FM2
8
to clock Adjusting
VOLUME.
DISPLAY
and activated
LED
FM3— AMI
FM3-. FM-. AMI
mode:
mode and the clock display
functions on the display (7).
main unit, the LED (8) will be flashing.
AM2 (MW2)
(MWI)— AM2 (MW2)
RADIO OPERATIONS
www.peiying.pl