Peiying Basic PY6688 Bedienungsanleitung Seite 11

RADIO OPERATIONS
STATION SELECTION
Press TUNE/SEEK/TRACK
REVERSE button (12) shortly for manual tuning function.
Press for several seconds the automatic tuning mode (SEEK
mode) is selected.
AUTOMATICALLY
- Automatically Memory Storing
Press AMS(MP3) button (13) for several
current frequency and checks the signal strength until one cycle search is finished.
And then 6 strongest stations are stored into the corresponding preset number
button.
- Program Scanning
Press AMS(MP3) button (13) shortly to scan preset station. When the field strength
level is more than the threshold level of stop level, the radio is holding at that preset
number for several seconds with releasing mute, then searches again.
STATION STORING
Press preset button (14—19)
1) RADIO MODE.
MI -M6
- PRESET MEMORY is loaded when key is pressed for less than 1 second
- PRESET MEMORY is saved when key is pressed for longer than 1 sec.
2) CD/ MP3 / FLASH MP3
PLAY / PAUSE
Press preset button
TOP - First song will play when Top key is pressed for longer than 0.5sec during play.
INT
Press preset button (15): During INTRO ON, INT indicator comes on and
begins playing the first 10sec of each song, until the last song is played. It begins
playing the entire track from where INT started
SCAN
Press scan button (26) to search radio station. When a station signal strength
the level to stop. The radio will playing the station for 5 seconds
the LCD at the same time. Press and hold scan button (26) more than 3 seconds to select the
station which you desired. The radio will start play the station.
AREA USA/EUR
In Radio mode press SEL button for several seconds.
AREA USA/EUR. At AREA USA/EUR.
www.peiying.pl
FORWARD button (11) or TUNE/SEEK/TRACK
MEMORY STORING
seconds, the radio searches
(14) is activated. During a PAUSE, DISC INDICATOR
SETUP
You can use VOL +1- to select the AREA frequency.
& PROGRAM SCANNING
and the frequency
LCD will be show from DSP OFF/ON ->
Peiying
from the
flashes.
level more than
blinking on
9