Instalation; Din Front-Mount - Peiying Basic Py6688 Bedienungsanleitung

Peiying
INSTALLATION
Choose the mounting location where the unit will not interfere with the normal
driving function of the driver.
Before finally installing the unit, connect the wiring temporarily and make sure
it is all connected up properly and the unit and the system work properly.
Use only the parts included with the unit to ensure proper installation.
of unauthorized parts can cause malfunctions.
Consult with your nearest dealer if installation requires the drilling of holes or
other modifications
Install the unit where it does not get in the driver's way and cannot injure the
passenger if there is a sudden stop. Like an emergency stop.
If installation angle exceeds 30 from horizontal, the unit might not give its
optimum performance.
Avoid installing the unit where it would be subject to high temperature, such
as from direct sunlight, or from hot air, form the heater, or where it would be
subject to dust, dirt or excessive

DIN FRONT-MOUNT

Installing the unit
1. Dashboard
2. Holder
After inserting the holder into
the dashboard, select
appropriate tab according
the thickness of the
material and bend them
inwards to secure the
(Fig. 1)
place.
3. Screw
2
of the vehicle.
vibration.
(Method A)
the
to
dashboard
holder in
300
2
3
(Fig. l)
INSTALLATION
The use
www.peiying.pl