Dell PowerVault 735N Handbuch Seite 3

support.dell.com

  
This document provides instructions for trained service technicians to install
VersaRails in a four-post rack cabinet. One VersaRail kit is required for each system to
be installed in the rack.
Before attempting this installation you should read through this entire document
carefully.
For procedures on installing your system in the rack, see your Rack Installation Guide.

    
The kit includes the following items:


One pair of VersaRails slide assemblies


One cable management arm assembly


Ten 10-32 x 0.500 Phillips-head screws


One cable tray and five 6-32 x 0.25-inch hex head screws,
for 4U and 7U systems only


One pair of rack adapters and four 10-32 shoulder screws,
for 7U systems only


One strain-relief bracket, for 2U systems only
    
See the safety instructions provided in your system's System Information document
for additional information.
             
                 !
 "
Installing VersaRails 1-1