Before The First Use - Linea 2000 Domo Do252Sv Gebrauchsanleitung

BEFORE THE FIRST USE

• Remove all packaging materials and any promotional stickers.
ASSEMBLY
The various accessories can be clicked onto the tube assembly (stick vacuum cleaner) or directly
onto the motor part, without the handle (hand vacuum cleaner).
The stick vacuum cleaner
1. Slide the tube assembly into the motor part until it clicks into place. Make sure the power pins
slide into the intended holes properly.
2. Slide the floor attachment on to the tube assembly until it clicks into place. Make sure the
power pins slide into the intended holes properly.
1
The handheld vacuum
Click the motorised floor brush, the dust brush or the crevice tool into the opening at the front of
the appliance.
To disassemble the appliance, remove the following parts one by one: The floor brush (or the
crevice tool or dusting brush), the tube and the dust container. To do this, press the release button
and remove the relevant part by pulling firmly.
WALL MOUNT
Please follow below instructions to fix the wall mount:
1. Drill 2 holes in the wall corresponding to the attachment points
of the wall mount.
socket and the drill holes is no more than 1.3 metres. The minimum
height for wall mounting is 1.2 metres.
2. Insert the supplied plugs into the wall.
3. Fix the wall mount using the supplied screws.
4. To store the device, simply hang it on the wall mount. You can also
store accessories on the wall mount, both at the top and bottom.
48
Please ensure the distance between the power
www.domo-elektro.be
2