Dimensions
Material
Dimension
Material
8. DISPOSAL OF ELECTRICAL
AND ELECTRONIC
EQUIMENT
When the equipment or parts
of the device are no longer
suitable for use, they must be
disposed of at an industrial
waste disposal site in accord-
ance with the regulations in
force in the countries where
they are marketed.
Environmentally
components and parts that
were built into the device have
to be disposed of at special-
ized sites.
- Directive on waste electrical
and electronic equipment
(WEEE) DIRECTIVE 2012/19/
EU
OF
THE
EUROPEAN
PARLIAMENT AND OF THE
COUNCIL.
- Directive on the restriction of
the use of certain hazardous
substances in electrical and
electronic
equipment
RECTIVE 2011/65/EU OF THE
EUROPEAN
PARLIAMENT
AND OF THE COUNCIL.
The symbol on the
product or its packag-
ing indicates that at
the end of its life, the
product may not be
treated
as
household waste and must be
disposed of in accordance
with your local authority's in-
structions and at properly des-
ignated sites.
Separate collection of indi-
ZIP VACUUM BAGS
22x24 cm
22x36 cm
Multilayer Film – Polyamide/Polyethilene
Valve – Silicone
Valve housing – Polypropylene
Zipper - Polyethilene
Ø 55 x 33 mm
Housing: Akrilonitril stiren and Polypropylene
Gasket: Silicone
vidual
equipment prevents negative
effects of environ-mental pol-
lution and minimizes danger
to human health, which may
occur as a result of improper
product disposal. In addition,
it enables reuse and recovery
of the material, thus saving
energy and raw materials.
For detailed information on
collecting, sorting, reuse and
hazardous
recycling of the product con-
tact the provider of WEEE
collection services or the shop
where you bought the equip-
ment.
9. WARRANTY
This warranty is valid for two
years from the date of pur-
chase. Evidence of original
purchase is required for war-
ranty services, so it is impor-
tant to keep your sales receipt.
This
DI-
breakdown caused by elec-
trical or mechanical failure.
It does not cover damage
caused by liquid entering the
device or breakdown caused
by not following the manufac-
turer's instructions.
If you have any comments
or questions concerning the
ordinary
functioning of the machine or
warranty, please contact us:
Van Berkel International Srl,
Via Ugo Foscolo, 22
21040 Oggiona S. Stefano (VA),
LIQUID TRAP
components
of
warranty
only
covers
20
EE
Italy
Customer phone:
+39 0331214311
E-mail:
psr@berkelinternational.com
For more information visit our
website:
https://www.theberkelworld.
com/en
The primary text of this in-
struction manual, drafted in
the Italian language, repre-
sents the only point of refer-
ence for the resolution of any
interpretative disputes.