Herunterladen Diese Seite drucken

Components: Vacuum Container With Lid, Zip Vacuum Bag And Liquid Trap; Charging - Berkel Icon Mini Vacuum Kit All In One Gebrauchsanleitung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 31
- The battery is filled when the
filling light stops flashing and
turns white.
Icon Mini Vacuum pump cre-
ates a preset vacuum pressure
in a container, jug, bottle, or a jar.
The most important functions
and components are indicat-
ed with numbers on Figure 1.
1.
ON/OFF button
2. Colour indicator
3. The body of the vacuum
pump
4. Silicone seal
5. Vacuum pump base
6. USB power cable
a) USB Type-C
b) USB Type-C
7. Slot for the USB-C connector

3.4.2. COMPONENTS: VACUUM CONTAINER WITH LID, ZIP VACUUM BAG AND LIQUID TRAP

tempered
glass
valve
fixed silicone
seal, do not
remove
Figure 2: vacuum containers with lid, ZIP vacuum bag and liquid trap

3.5. CHARGING

a) The vacuum pump usu-
ally needs to be charged
before first use. Insert the
smaller
USB
(USB-C) into the pump
port and the larger USB
connector (USB-A) into an
electric adapter with a USB
port.
b) The pump can be charged
by using an adapter (5 V,
1000 mA), a portable bat-
tery Power Bank (5 V, min.
2000 mAh), or by plugging
it into a USB port of a com-
puter or a laptop. In this
Figure 1: Icon Mini Vacuum
pump
marked with numbers.
polypropylene (PP)
case the charging speed
depends on the USB port's
use: if the USB port is in-
tended for data-transfer
only, the battery charging
connector
will take longer, and if it
is intended for charging
electronic
charging will be faster. It
usually takes 45 min to 2
hours for the pump to be
fully charged.
c) When the battery is com-
pletely empty, the indica-
tor light flashes red while
charging. When the bat-
tery is half full, the indi-
components
are
valve (silicone)
valve housing (PE)
PA/PE
devices,
the
16
housing: Akrilonitril stiren
and Polypropylene
gasket: Silicone
cator light flashes white
while charging.
d) The charging is complete
when the indicator light
stops flashing and turns
white.
e) The fully charged pump
can complete up to 90 vac-
uum cycles.
f)
A longer period of non-use
of the device results in ex-
cessive battery discharge.
Therefore, when the de-
vice is not in use, it is rec-
ommended to charge it at
least every three months.
loading

Diese Anleitung auch für:

Bkicnmv00qvc00000r