Troubleshooting; Product Specification - Berkel Icon Mini Vacuum Kit All In One Gebrauchsanleitung

6. TROUBLESHOOTING

The pump does not respond to pressing the
button.
The pump does not create vacuum in a con-
tainer, jug or in a container closed with a uni-
versal lid, or the vacuum does not persist.
The pump works but it does not create vacuum
in a container.
The pump does not fit to my container.
The problems encountered cannot be solved.

7. PRODUCT SPECIFICATION

Dimension with dock
Weight with dock
Material
Battery
Adapter
(not included)
Volumes
Material
PROBLEM
MINI ICON VACUUM
Ø 92,5 x 178 mm
0.344 kg
PC ABS plastic, PP plastic, silicone
3.7 V
Input: 100-240 V~, 50-60 Hz
Output: 5 V
VACUUM CONTAINERS WITH LIDS
0.5 L, 0.9 L and 1.4 L
Containers – Polypropylene (PP)
Lids – Tempered glass
Ventil and seal - Silicone
- It is most likely that the pump's battery is
empty. Charge the battery.
- Check if the lid of the vacuum container, the
seal, and the valve are positioned correctly.
- Check if the silicone seal and the valve of the
container are clean and dry. If necessary, re-
move the valve from the lid, clean it, and re-
attach it.
- During vacuum packing, press the pump
onto the dock surrounding the valve of the
container in order to create a tight seal be-
tween the pump and the area around the
valve.
- Check if the lid of the vacuum container, the
silicone seal and the valve are positioned cor-
rectly.
- Check if the silicone seal and the valve of the
container are clean and dry. If necessary, re-
move the valve from the lid, clean it, and re-
attach it.
- Turn the gasket around. See 2.2. b).
- You must contact the repair service. The man-
ufacturer will assume responsibility only if you
comply with the instructions and do not at-
tempt to repair the device yourself.
, Li-Ion, 1200 mAh
, 1000 mA
19
SOLUTION