Using the Battery
Inserting the battery
– Open the battery compartment cover . Insert the battery by
sliding the latch with the battery to the side and inserting the
battery, making sure that the contacts on the battery match the
contacts in the camera . If the battery is inserted the wrong way
round, the battery compartment cannot be closed .
– To remove the battery, slide the latch to the side and the
battery will automatically slide out for removal .
Charging the battery
– Use the supplied USB-C cable to charge your camera either via
an adapter (5,0 V
the PC .
– The charging indicator lights up continuously when the battery
is charging .
– The charging indicator switches off automatically when the
battery is fully charged .
It usually takes around 2 hours to fully charge the battery . Once
the battery is fully charged, it will operate for around 60 minutes .
2,0 A) or connect the camera directly to
35