Rollei Powerflex 10x Optical Zoom Anleitung Seite 38

Using the Battery
38
Inserting the Battery
– Turn off the camera and open the battery compartment cover . Insert
the battery by sliding the latch with the battery to the side and sliding
the battery into the compartment . Make sure that the contacts on the
battery match the contacts in the camera . If the battery is inserted the
wrong way around, the battery compartment and latch will not close .
– To remove the battery, slide the latch to the side and gently pull the tab
attached to the battery .
Charging the Battery
– Use the included USB-C cable to charge your camera either via an adap-
ter (5 .0 V
– The charging indicator lights up red when the battery is charging .
– The charging indicator turns off automatically when the battery is fully
charged .
2 .0 A) or connect the camera directly to the PC .
ENGLISH