Rollei Powerflex 10x Retro Bedienungsanleitung Seite 38

Using the Battery
38
Inserting the Battery
– Turn off the camera and open the battery compartment cover . Insert the
battery by sliding the latch to the side with the battery and sliding the
battery into the compartment until it clicks into place . Make sure that
the contacts on the battery match the contacts in the camera .
– To remove the battery, slide the latch to the side and gently pull out the
battery .
Charging the Battery
– Use the included USB-C cable to charge your camera either via an adap-
ter (5 .0 V
– The charging indicator lights up red when the battery is charging .
– The charging indicator turns off automatically when the battery is fully
charged .
2 .0 A) or connect the camera directly to the PC .
ENGLISH