Menu Control - Laserliner Coatingtest-Master Bedienungsanleitung

Inserting and removing the batteries
1
Open the battery compartment on the rear of
the housing and insert 2 x 1.5V LR03 (AAA).
Correct polarity must be observed. Replace the
battery compartment cover. The device can now
be switched on. The device must be switched off
before removing the batteries.

Menu control

3
The functions and settings of the measu-
ring device must be controlled through the
menu. The menu is activated by pressing
the "Menu" key (7). The same key „Select"
is also used to select the individual menu
options. Use the keys "5" and "6" to
navigate within the menu. Use the "Esc" (1)
key to leave the menu or to go back to the
previous submenu.
Based on this means of operation, the
following settings and menu options can
be selected.
We recommend familiarising yourself with
the device and its style of operation before
starting.
CoatingTest-Master
ON/OFF
2
1 sec
19
EN