Mechanical Installation - Lenze 8200 motec Montageanleitung

2

Mechanical installation

The switch/potentiometer unit can be mounted to the heatsink of a motec or a wall.
Mounting to the heatsink of a motec
1. Mount the mounting plate with 2 screws M4 x 20 and 2 spring steel sheets 0 to the
heat sink.
2. Wire the switch/potentiometer unit
– to the standard−I/O
– to the application−I/O
3. Assemble the motec (
4. Mount the switch/potentiometer unit with 4 screws M4 x 30 1to the mounting
plate.
Wall mounting
1. Mount the mounting plate to the wall using appropriate screws.
2. Mount the switch/potentiometer unit with 4 screws M4 x 30 to the mounting plate.
3. Wire the switch/potentiometer unit
– to the Standard−I/O
– to the Application−I/O
4. Assemble the motec (
EDK82ZBU DE/EN/FR 4.0
Mechanical installation
0
^ 9
^ 10
^ Mounting Instructions for motec
^ 9
^ 10
^ Mounting Instructions for motec
8
)
)
l