Herunterladen Inhalt Inhalt Diese Seite drucken

Steinbach SMART RXB 450 Kurzanleitung Seite 12

Vorschau ausblenden Andere Handbücher für SMART RXB 450:
Inhaltsverzeichnis
Verfügbare Sprachen

Verfügbare Sprachen

1.) Switch on the device. To do this, press the switch-on button for approx.
2 seconds. The LED display (4) briefly lights up green, then the LED display
lights up blue continuously.
2.) Manually select the appropriate cleaning mode on the appliance by
briefly pressing the on/off button (2) or via the app. The indicator for the
selected cleaning mode (3) lights up blue.
3.) The appliance must be placed in water within 3 minutes, otherwise it will
switch off automatically.
4.) Hold the appliance by the carrying handle (1), immerse it in the water
at a slight forward angle until no more air escapes and lower it with the
underside towards the bottom of the pool for unhindered cleaning.
5.) The LED indicator (4) flashes blue approximately 20 seconds after
automatic calibration on the floor. The appliance starts with the set cleaning
mode.
6.) The appliance moves to the edge of the pool in self-parking mode,
flashing yellow, as soon as cleaning is complete or the battery is almost
empty.
7.) Attach the supplied hook to a telescopic rod and thread it through the
carrying handle (1) of the appliance to remove the appliance from the pool.
The cycle timer can only be set via the app.
CLEANING
Clean the appliance and all components thoroughly after each use. Only use
mild bathroom cleaners, clear water and a lint-free cloth. Avoid aggressive
agents. Then dry it completely.
REMOVE AND CLEAN THE FILTER
1.) Open the flap for the filter unit (6).
2.) Pull the filter unit vertically upwards out of the appliance and open the
cover of the filter unit.
3.) Rinse the filter unit thoroughly with clean tap water and allow it to dry
completely.
4.) Close the cover of the filter unit until you hear it click into place and put
it back into the appliance.
STORAGE
To extend the service life of the battery, fully charge the robot and switch
it off before storing it for a longer period of time. Store the device and
the components in a cool, dry and frost-free place (≥ +5 °C) out of direct
sunlight.
Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Stb01421

Inhaltsverzeichnis