Steinbach SMART RXB 450 Kurzanleitung Seite 11

INSTALL APP
To be able to use the full range of functions of the device, the app must
be installed. Follow the link under the QR code below DOWNLOADS AND
FURTHER LINKS.
When using the app, both WLAN and Bluetooth must be activated
on your mobile device.
Keep the app up to date by regularly installing updates.
OPERATION
The device can be used as delivered without using the app. The standard
mode is complete cleaning of the pool. Optionally, the cleaning programme
can be optimised for individual requirements using the app. In both cases,
the cleaning mode must be set before inserting the device into the pool.
When the appliance is restarted, it automatically switches to the last
cleaning mode set.
There are 3 cleaning modes that you can set directly on the appliance:
Briefly press the on/off button (2) on the appliance to switch between the
cleaning modes manually. The indicator for the selected cleaning mode (3)
lights up blue.
Mode
Standard full pool Wall + floor + waterline/*wall then floor
Floor
Wall
LED colour Display
Permanent
Flashing
Permanent
Flashing
Flashing
Permanent
Permanent or flashing
Cleaning area
*Additional setting only possible in the APP. The cleaning
sequence can be defined here with the APP.
Soil/*Eco-soil
*Additional setting only possible in the APP. Energy-saving
mode to enable longer runtime.
Wall only
Status
Switch on
In operation
Connection to the app
Battery is charging, battery level
is low or device is in self-parking
mode
Battery is charging
Battery is fully charged
Malfunction