Hama Add-On Bedienungsanleitung Seite 7

Giacomini
• To t the Giacomini adapter, please rst attach the top piece, then place the tappet extension on the valve
pin, and then nally secure the piston to the thermostat.
4.3 Fitting on the radiator valve
Warning - tting
• Never apply orce during the tting process. This can damage your device.
• Ensure that the radiator is switched o and has cooled down beore starting to t any attachments.
1
2
• Place the thermostat straight on the valve and tighten the union nut.
• Fit the thermostat so that the LED indicator remains visible or you.
• Press the control dial (1). The "LA" display starts to fash. The radiator thermostat now carries out an
adaptation run.
• Once the adaptation run has been carried out, the display shows the current temperature. I it does not, carry
out the above steps again.
Flashing
30 sec.