Hama Add-On Bedienungsanleitung Seite 12

4
• You can now rename your thermostats i you wish to
by pressing on the pen symbol next to the device name.
• Press "Done" to end the integration process.
• Slide the "Activate" button at the bottom edge o the screen rom right to let to enable the radiator
thermostat control.
• You can now set and congure your radiator thermostat using the app.
5. Coniguring thermostats
• For simple temperature setting, there are our dierent operating modes available under "Program" or each
day o the week.
• This gives you the option o pre-setting the temperature o your radiator automatically at various times o the
day. The programs pre-set in the app mean you can also carry out urther automatic temperature changes.
Under "Settings", you can activate the limescale protection, anti-rost protection, window open detection, child
saety and temperature calibration unctions.
These unctions, along with a ew other setting options, are explained below.
Limescale protection
• I the radiator valve is not opened or two or more weeks, this can cause limescale to build up in the valve.
• To prevent this, the radiator thermostat opens the valve or 30 seconds every two weeks. The display shows
"Ad" during this process.
Anti-rost protection
• In O mode, the display shows
• I the temperature alls below 5°C, the thermostat automatically activates the heating.
• Heating continues until the temperature reaches 8°C. The thermostat then switches back to O mode.
Window open detection
• I a window is opened while the heating is on, the radiator thermostat automatically stops the heating process
i the temperature alls rapidly. (Temperature drop 6°C within 4 min)
• "OP" appears in the display. As soon as the window is closed and the temperature has risen again by 2°C, the
radiator thermostat automatically returns to normal operation.
.