Hama Add-On Bedienungsanleitung Seite 6

4.2 Fitting the adapter
• Thanks to the union nut, the thermostat can be tted to all valves with the thread dimensions M30 x 1.5 mm
rom the most common brands such as Heimeier, MNG, Junkers, Landis+Gyr (Duodyr), Honeywell-Braukmann,
Oventrop, Schlösser, Comap, Val Sanayii, Mertik Maxitrol, Watts, Wingenroth (Wirofex), R.B.M, Tiemme,
Jaga, Siemens and Idmar.
• With the adapters included in the extent o delivery, the device can also be tted to radiator valves o type
Danoss RA, Danoss RAV, Cale and Giacomini.
To t the attachments, please ollow the instructions below or the respective part.
Danoss RA and Danoss RAV
• While tting, ensure that the pins inside the adapter cover the same position as the notches on the valve.
• Fully attach the adapter appropriate or your valve.
• During tting, you may need to use a screwdriver and bend the adapter slightly in the area o the screw
bushing. This will enable the adapter to be pushed more easily onto the valve. Ater locking it onto the body
o the valve, secure the adapter using the enclosed screw and nut.
Danoss RAV
• On Danoss RAV valves, the tappet extension must be placed on the valve pin beore tting.
Cale
• Please place the Cale adapter directly on the valve.