Attenuated Outside Temperature (Taged); Composite Outside Temperature (Tagem); Outside Temperature Source - Siemens Albatros Rva63.242 Basisdokumentation

Description
Setting
Description
Setting
Only RVA63..
RVA66..
Benefits
Description
Setting
Effect
Display
Siemens
Building Technologies

4.14 Attenuated outside temperature (TAged)

Also refer to "Attenuated outside temperature" in Index.
Display
-50...+50

4.15 Composite outside temperature (TAgem)

Also refer to "Composite outside temperature" in Index.
Display
-50...+50

4.16 Outside temperature source

•
Display and location of actual outside temperature measurement
When interconnecting several controllers, only 1 outside sensor is required. It can be
connected to any of the controllers to deliver its signal via the bus system.
The controllers to which no sensor is connected adopt the outside temperature signal
via the bus system, from a controller to which a sensor is connected.
Display
– – . – –
00.01...14.16
When selecting this operating line, the address of the outside sensor that currently
delivers the outside temperature signal is automatically displayed.
– – . – – No outside sensor signal
01.02 Address of outside sensor.
The first 2 numerals represent the segment number (01.)
The second 2 numerals represent the device number (.02)
Basic documentation RVA63.242, RVA53.242, RVA66.540
Description of heating engineer settings
Unit
°C
Unit
°C
Unit
No signal
Segment and device address
85/236
CE1P2373E
23.3.2009