Herunterladen Diese Seite drucken

Siemens SIMATIC NET S7-1200 Kompaktbetriebsanleitung Seite 4

Compact switch module
Vorschau ausblenden Andere Handbücher für SIMATIC NET S7-1200:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 28
Intended usage
SIMATIC NET devices are intended for use in industrial areas. If you want to use the device in a different environment, check
the required conditions.
The device may be operated only by personnel qualified for the specific task in accordance with the relevant documentation,
in particular its warning notices and safety information. Due to training and experience, qualified personnel is capable of
recognizing risks and avoiding possible dangers when handling these devices.
WARNING
Proper use
SIMATIC NET devices are intended for the automation of mechanical plants, control technology and process technology.
Refer to the relevant documentation for information on the scope of application of the respective device (e.g. ambient
conditions, possible use in safety-critical systems).
If third-party products and components are used, these must be recommended or approved by Siemens. Proper transport,
storage, installation, assembly/disassembly, commissioning, operation, maintenance and decommissioning are required to
ensure that the devices and their accessories operate safely and without any problems.
Death or serious injury can occur if this warning is ignored.
Observe the notes in the associated documentation (Page 3).
Electromagnetic compatibility
The devices are intended for operation in the EMC environment class Industry.
Make sure that your automation system is set up in an EMC-compliant manner as described in the documentation (Page 3).
NOTICE
Interference emission / Interference immunity
The operation of the devices can cause radio interference in residential areas.
If higher EMI is expected at the place of use than is intended for the industrial area according to EN61000-6-2, additional
measures are required (e.g. ESD, overvoltage protection).
2
Connecting/installing and removing
WARNING
Do not use any parts that show evidence of damage
If you use damaged parts, there is no guarantee that the device will function according to the specification.
If you use damaged parts, this can lead to the following problems:
Injury to persons
Loss of the approvals
Violation of the EMC regulations
Damage to the device and other components
Use only undamaged parts.
WARNING
If a device is operated in an ambient temperature of more than 55 °C, the temperature of the device enclosure
may be higher than 70 °C. The device must therefore be installed so that it is only accessible to service
personnel or users that are aware of the reason for restricted access and of the required safety measures at an
ambient temperature higher than 55 to 70 °C.
WARNING
If the device is installed in a cabinet, the inner temperature of the cabinet corresponds to the ambient temperature of the
device.
4
Compact Switch Module CSM 1277 G2
A5E54595177-AA, 06/2025

Werbung

loading

Diese Anleitung auch für:

Simatic net csm 1277 g26gk7277-1aa50-0aa0