Safety Instructions For All Saws - Parkside Performance Ppmsa 20-Li A1 Bedienungsanleitung

g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
wo o
the power tool for operations different
from those intended could result in a
hazardous situation.
h) Keep handles and grasping
surfaces dry, clean and free from
oi and as Slippery handles and
grasping surfaces do not allow for
safe handling and control of the tool in
unexpected situations.
Battery tool use and care
a) Recharge only with the charger
s i d
charger that is suitable for one type of
battery pack may create a risk of re
when used with another battery pack.
b) Use power tools only with
s i a d si na d a
a s Use of any other battery packs
may create a risk of injury and re.
c) When battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins,
keys, nails, screws or other small
metal objects, that can make a
connection from one terminal
o ano Shorting the battery
terminals together may cause burns or
a re.
d) nd a si
be ejected from the battery; avoid
contact. If contact accidentally
o s s wi
contacts eyes, additionally seek
di a Liquid ejected from the
battery may cause irritation or burns.
e) Do not use a battery pack
for tool that is damaged or
odi d Damaged or modi ed
batteries exhibit unpredictable
behaviour resulting in re, explosion or
risk of injury.
14 GB
o d Use of
an a A
ondi ions i id
wa I i id
f) Do not expose a battery pack
o oo o
a
temperature above 130 C may cause
explosion.
g) Follow all charging instructions
and do not charge the battery
pack or tool outside the
a
ins ions Charging improperly or
at temperatures outside the speci ed
range may damage the battery and
increase the risk of the re.
Service
a) Have your power tool serviced by
a a i d
id n i a
will ensure that the safety of the power
tool is maintained.
b) Never service damaged battery
a s Service of battery packs
should be only be performed by the
manufactured or authorized service
providers.
˜ Safety instructions for all
saws
Cutting procedures
a) DANGER: Keep hands away
from cutting area and the
blade. Keep your second
hand on auxiliary handle, or motor
o sin If both hands are holding the
a
saw, they cannot be cut by the blade.
b) Do not reach underneath the
wo i
protect you from the blade below the
workpiece.
c) Adjust the cutting depth to the
i n ss o
than a full tooth of the blade teeth
should be visible below the workpiece.
o ssi
Exposure to re or
an s i d in
ai son sin on
a n a s This
The guard cannot
wo i Less