ECOVACS ROBOTICS DEEBOT OZMO T8 Bedienungsanleitung Seite 28

No. Malfunction
DEEBOT misses cleaning
8 spots to be cleaned, or repeats
cleaning the area cleaned.
DEEBOT is making too much
9
noise when cleaning.
DEEBOT is not able to connect
10
to the home Wi-Fi network.
Possible Causes
The cleaning cycle is interfered
objects or barriers on the floor.
DEEBOT is working on slippery polished
floors.
DEEBOT is unable to reach certain
blocked by furniture or barriers.
The TrueMapping Distance Sensor is
blocked.
DEEBOT is tangled or blocked with debris.
Incorrect home Wi-Fi username
entered.
Incorrect App installed.
DEEBOT is not within range of your home
Wi-Fi signal.
Network setup started before DEEBOT was
ready.
DEEBOT does not support 5 GHz Wi-Fi.
Your smartphone's operating system
to be updated.
Remove power cords and small objects from the floor
by small to ensure cleaning efficiency. DEEBOT will automatically
clean the area missed, please avoid moving DEEBOT
manually or block the path during the cleaning
Make sure the floor
cleaning.
Tidy up the area to be cleaned by putting furniture and
areas
small objects in their proper place.
Remove the objects that are blocking the TrueMapping
Distance Sensor.
Clean DEEBOT
and restart. If the trouble
Customer Care.
or password
Enter the correct
Please download
Make sure DEEBOT is within range of your home Wi-Fi
signal.
Turn ON Power
DEEBOT is ready for network
Indicator light flashes slowly.
Make sure the robot
Wi-Fi network.
needs
Update your smartphone's
Solutions
cycle.
wax is dried before DEEBOT
as described in section 4 Maintenance
persists, please contact
home Wi-Fi username and password.
and install ECOVACS HOME App.
Switch. Press the RESET Button.
setup when its Wi-Fi
has been connected with 2.4
operating system.
starts
GHz
27 EN