Philips sonicare Advanced Clean Bedienungsanleitung Seite 18

20
English
Charger
Storage
Locating the model number
Troubleshooting
Problem
I cannot fully attach the
brush head. There is a
gap between the brush
head and handle.
1 Unplug the charger before you clean it.
2 Wipe the surface of the charger with a damp cloth.
If you are not going to use the product for a long time,
unplug it, and clean it (see chapter 'Cleaning'). Store it in
a cool and dry place away from direct sunlight.
Charge the toothbrush regularly to prevent the battery
from discharging completely. A completely discharged
battery may fail to charge again.
Look on the bottom of the Philips Sonicare toothbrush
handle for the model number (e.g. HX123A).
This chapter summarizes the most common problems
you could encounter with the appliance. If you are
unable to solve the problem with the information below,
visit www.philips.com/support and insert your model
number for a list of frequently asked questions or contact
the Consumer Care Center in your country.
Possible Cause Solution
This gap is normal and is
needed for the brush
head to vibrate
appropriately. The brush
head must be able to
move to create the right
amount of vibrations.