English/Chinese; Voice Prompt - Retevis Rt24 Bedienungsanleitung

. Battery Save Function
his function can be set by the software.
urn on this function can make the standby time more longer.
In the software:
Freq
fiö¯E]
V" Lavel Off
Puvvora
D.I.y
Scramble
hen the radio is allowed the scramble function, and press the key, TX voice will be
ent out with scramble, other radio only received the signal when its scrambler also
urns on.
RX CTC'CCS
Scan Busy
37 s
44€oss•s
6
Hgh
Off
8
9 '4610623 NO
Ye4
No
.Busy Channel Lock
ou can turn on/off this function via software.
: if the current channel does not have CTCSS/DCS, When there is signal, TX prohibited
hen you press PTT.
: If the current channel does not have CTCSS/DCS, when there is signal which does not
ave CTCSS/DCS, TX prohibited when you press PTT.
: If the current channels does not have CTCSS/DCS,
TCSS/DCS, the radio will transmit when you press PTT.
.vox
peak to the microphone in normal voice to transmit, no need to press PTT switch, turn
OX on/off though the software.
• when VOX is on in your working channel.
peak to the microphone directly, it will transmit automatically.
061 CT
Voi ee
Tone
No No
No No
No
Na
No
No No
No No
No
No No
when there is signal which have
: when a headset with a microphone is used.
hen VOX is on, you should VOX again for the radio to identify voice volume.
f the microphone is too sensitive, the noise around radio will start transmitting.
f the microphone is not sensitive, the radio can not collect your voice, Please Adjust VOX
evel well to guarantee smooth communications.
nglish/Chinese

Voice Prompt

oice prompt
he default setting is Chinese voice prompt, and you will know the working condition of
he radio with voice prompt.
I) The voice prompt can be selected "Chinese/EngIish/Tone/OFF"
"Voice/Beep Tone" of the "Optional Features" in the software for. When choosing
"OFF", voice prompt turns off.
) Channel annunciation: You will get to know the working conditions of current channel
which is being operated.
) Low battery alert: The radio will alert you when the battery capacity reaches the
minimum operating voltage.
Low battery prompt
he default setting is Chinese voice prompt. When transmitting
apacity reaches the pre-determined low level, the indicator light blinks red, and a low
attery alert tone will be heard.
he indicating tone can be "Please change the battery". When the low battery alert occurs,
t can not transmit, please change or charge the battery.
quelch function
he squelch level will determine the signal strength to open the speaker of the radio. If the
quelch level is lower, the background noise of opening the radios speaker will be higher,
nd the corresponding communication range will be further, but the anti-interference
apacity will be weaker.
he default setting of squelch level is 5, you can adjust it through the menu "Squelch Level"
f the "Optional Features" in the software for. Level 0 to 9 can be selected. 0 is the lowest
ime out timer (TOT)
he purpose of TOT is to prevent any radio from talking in one channel for a long time,
nd to prevent the transceiver from being damaged because of continuous transmission.
f the transmitting time exceeds the TOT pre-set time, the radio will sound "Du". Release
Power protection function
hen the radio is in normal use or maintenance,
orking voltage is beyond the normal supplying voltage. Lower than 3V or higher than 5V,
he transmission will be rohibition. The radio
through the menu
or standby, if the battery
the transmission will be prohibited if the
cannot ower on when it is hi her than 5V.
101