Daily Use - IKEA NUTID HCI4T Bedienungsanleitung

ENGLISH

Daily use

To switch the hob on
"A" pressed for approx. 2 seconds. The 4
cooking zone displays show "0".
If within about 10 sec. none of the cooking
zones is activated, the hob switches itself off
automatically on safety grounds.
IMPORTANT: Before switching on the hob,
deactivate the key lock by pressing button
"E".
Press one of the buttons "B" corresponding
to the cooking zone you intend to use.
Select the heat setting required with buttons
"B" or "C". The other selectable cooking
settings go from 1 - 9.
IMPORTANT: After setting the required
power level, the induction cooking zone is
deactivated within 60 seconds if a cooking
pot or pan is not placed on it.
To modify the power of a cooking zone,
press the buttons "B" or "C".
If the cooking zone is on, it can be switched
off by pressing the buttons "B" and "C" at
the same time.
Press button "A" to switch off all activated
plates.
The KEY LOCK
on by holding down button "E" until a dot
lights up above the function button. This
function locks all the buttons except the hob
switching off button "A". The function remains
on even after the hob is switched off and on
again and can be deactivated by pressing
button "E" again until the dot above the
function button goes off.
The TIMER function
used as a clock and also for programming
the operation of the required cooking zones.
To activate the function, press the button
with the clock symbol "F". To programme
the timer for a given cooking zone, first
select the desired cooking zone using one
of the buttons "B". A dot lights up next to the
display of the selected cooking zone. Within
10 seconds, set the cooking time using
, keep button
function is switched
(if available) can be
buttons "F" +/- (99-10 min).
The Timer function begins automatically and
the red indicator dot remains lit.
At the end of the set cooking time, an
acoustic signal sounds. If the cooking zone
has been programmed to operate with the
timer, it is switched off and the indicator dot
switches off too.
The timer function can only be used to
activate one cooking zone.
To use the "minute minder" function, press
the button with the clock symbol "F", set the
power of the cooking zone to 0 (zero) and
then press buttons "F" +/- to set the desired
time.
When the set time has elapsed, an acoustic
signal sounds.
The FAST BOIL
level higher than max. to bring water
rapidly to the boil.
To activate the function, select a cooking
zone with button "B" and press button "D".
A "P" appears on the display.
DUAL COOKING ZONE
available). Press button "G" to deactivate or
activate the outer ring of the double cooking
zone.
RESIDUAL HEAT INDICATOR
When the cooking zone is switched off,
the residual heat indicator "H" remains
on or flashes alternating with "0" until the
temperature of the hob returns within safety
levels.
IMPORTANT: The hob's features include an
automatic switching off function. Prolonged
use of the same heat setting causes
switching off of the cooking zone (e.g. after
approx. 1 hour at maximum heat setting,
the cooking zone switches off).
function sets a heating
function (if
H
6