CERA-Design RONDOTHERM Anleitung Seite 56

Erection of RONDOTHERM feed air connection "below"
and the panel has to be removed
so that a feed air duct for feed air
from underneath can be fitted.
After this, the feed air box
connection panel needs to be
unscrewed.
(4 screws, 5 mm Allen key).
This connection panel is now
pushed sideways out of the way
in the feed air box so that the
feed air box is completely open
to the rear.
The stove floor panel is closed off with
a thick panel. This panel is fixed to the
floor with a screw. Undo the screw and
pull the cover panel out to the rear.
Now the floor panel is
unscrewed from the feed air
box (4 screws) and removed.
now the cover panel (2 screws)
is removed from the floor panel
and . . .
55
These webs
have to be cut through