VANTRUE Element 1 Lite Bedienungsanleitung Seite 10

Note: There are two protective films
numbered 1 and 2. The first step is to
tear off the No.1 protective film and
EN EN
stick it on the front windshield, then
tear off the No.2 protective film.
2. Peel off the protective film on the E1 Lite mount, align it with the middle of
the electrostatic sticker, and stick it in place.
Install the car charger: Please take the car charger out of the package.
3.
Connect one end of the car charger to the cigarette lighter and the other
end to the E1 Lite mount port. When finished, just put the car charger cable
in order as instructed in Figure 2.
- 5 -