Decoderwerk 40802 Benutzerhandbuch Seite 22

Commissioning
When connecting the power supply, the
◆
polarity of the connection does not need to
be taken into account.
After connecting the power supply, the blue
◆
LED on the decoder lights up to indicate that
the decoder is ready for operation.
Power supply
Voltage range
12-24V DC voltage
◆
9-18V AC voltage
◆
12-24V track voltage
◆
Power requirement
Quiescent current below 10mA
◆
The current requirement of the outputs depends
◆
on the connected items.
Watch out!
If the decoder is supplied with AC voltage,
◆
the voltage at the outputs increases.
An applied AC voltage is converted to DC
◆
voltage, but this also leads to an increase in
voltage.
When operating the decoder with 18V AC
◆
voltage, approx. 24V DC voltage is output at
the outputs.
When operating the decoder with 12V
◆
AC voltage is output at the outputs approx. 16V
DC voltage.
5