Herunterladen Diese Seite drucken

Decoderwerk 40802 Benutzerhandbuch Seite 20

Vorschau ausblenden Andere Handbücher für 40802:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Safety regulations
Intended use
The product is intended exclusively for
controlling the points of a model railroad
with motor drives.
The product may only be used indoors and in
dry conditions.
The product may only be operated with the
components specified in this manual.
All installation and connection work may only
be carried out with the operating voltage
deactivated.
The product may only be operated with fused
power sources, i.e. protected against overload
and short circuit.
The appliance must not be operated unsupervised.
The product is not a toy and is not suitable
for children under the age of 14.
Protection against electric
shocks
Moisture, e.g. due to increased humidity or
condensation, can lead to dangerous current
flows through the body and to injuries.
Only operate the product indoors and in dry
conditions.
Avoid any contact of the product with moisture,
wetness or splashing water.
Only touch the product when the power
source is switched off.
Only use voltage sources with low voltages
below 24 volts.
Protection against fire
As a result of a short circuit, overcurrents can
cause excessive heating of conductor tracks,
components or cables and thus possibly also
fires.
The product itself is always protected against
overcurrents by appropriate fuses.
Only use tested and approved power supply
units with protection against overload and
short circuit.
The specified maximum permissible loads
must not be exceeded.
Only use cables with sufficient cross-sections
for the loads.
Protect the product from contact with
conductive materials.
Danger due to environmental influences
Avoid thermal and mechanical loads, e.g. from
heat, cold and vibrations,
Pull and push.
Protection against electrostatic discharge
The product contains components that can be
destroyed by electrostatic discharge.
Only touch the product if you have taken
protective measures against electrostatic
discharge, e.g. by wearing ESD protective
tape.
Avoid direct contact with the electronic
components on the circuit board.
3

Werbung

loading

Verwandte Produkte für Decoderwerk 40802