Beijer Electronics IPC-15 Installationsanleitung Seite 6

Safety precautions
– Make sure that the voltage and polarity of the power source is correct before
connecting the terminal to the power outlet.
– The openings on the enclosure are for air convection. Do not cover these
openings.
– Do not place the terminal where it might be exposed to strong magnetic
fields.
– Do not install the terminal in direct sunlight.
– Peripheral equipment must be appropriate for the application.
– Some terminal models have a laminated film over the display to reduce the
risk of scratches. To avoid static electricity that might damage the terminal,
carefully remove the film.
During use
– Keep the terminal clean.
– Emergency stop and other safety functions may not be controlled from the
terminal.
– Do not touch the keys, displays, etc. with sharp objects.
Service and maintenance
– The agreed warranty applies.
– Clean the display and face with a soft cloth and mild detergent.
– Only qualified personnel should carry out repairs.
Dismantling and scrapping
– The terminal or parts thereof shall be recycled according to local regulations.
– The following components contain substances that might be hazardous to
health and the environment: lithium battery, electrolytic capacitor and
display.
Please read the entire installation manual prior to installing and using this equipment. Only qualified personnel may install,
operate or repair this equipment. Beijer Electronics AB is not responsible for modified, altered or renovated equipment.
Because the equipment has a wide range of applications, users must acquire the appropriate knowledge to use the equipment
properly in their specific applications. Persons responsible for the application and the equipment must themselves ensure that
each application is in compliance with all relevant requirements, standards and legislation in respect to configuration and
safety. Only parts and accessories manufactured according to specifications set by Beijer Electronics AB may be used.
BEIJER ELECTRONICS AB SHALL NOT BE LIABLE TO ANYONE FOR ANY DIRECT, INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE INSTALLATION, USE OR REPAIR
OF THIS EQUIPMENT, WHETHER ARISING IN TORT, CONTRACT, OR OTHERWISE. BUYER'S SOLE
REMEDY SHALL BE THE REPAIR, REPLACEMENT, OR REFUND OF PURCHASE PRICE, AND THE CHOICE
OF THE APPLICABLE REMEDY SHALL BE AT THE SOLE DISCRETION OF BEIJER ELECTRONICS AB.
1-2 Beijer Electronics, MA00670