Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Touch screen calibration
If you are not satisfied with the precision of the touch screen, it is possible to re-
calibrate it. All settings are made using the Eely 2000 Utility software.
To start Eely 2000 Utility, press Start/All Programs/Beijer Electronics/Eely
2000 Utility.
Calibration
– Press the 4 pts Cal button. Four calibration symbols are displayed.
– Press and hold down the centre of the blinking symbol with a blunt object,
or with your finger, until the next symbol starts blinking.
After each one of the symbols has been calibrated, they disappear, and the touch
screen is ready to use.
Double Click Speed
– Move the slider by Double Click Speed to define the acceptable time interval
between two touchdowns for them to be interpreted as a double click.
Beijer Electronics, MA00670
Installation
1-7
Werbung
