Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety precautions
General
– Read the safety precautions carefully.
– Check the delivery for transportation damage. If damage is found, notify the
supplier as soon as possible.
– The terminal fulfills the requirements of article 4 of EMC directive
89/336/EEC.
– For horizontally installed equipment, the projected surface under the
terminal must fulfill the fire enclosure requirements in IEC 60 950 third
edit:1999. A protection plate described in the
may be ordered from the supplier.
– Do not use the terminal in an environment with high explosive hazards.
– The supplier is not responsible for modified, altered or reconstructed
equipment.
– Use only parts and accessories manufactured according to specifications of the
supplier.
– Read the installation and operating instructions carefully before installing,
using or repairing the terminal.
– Replacing the battery incorrectly may result in explosion. Only use batteries
recommended by the supplier.
– Never pour fluids into any openings in the terminal. This may cause fire or
electrical shock.
– Only qualified personnel may operate the terminal.
During installation
– The terminal is designed for stationary installation on a plane surface.
– Put the terminal on a stable surface during installation. Dropping it or letting
it fall may cause damage.
– Install the terminal according to the accompanying installation instructions.
– Ground the terminal according to the accompanying installation
instructions.
– Only qualified personnel may install the terminal.
– Separate the high voltage, signal and supply cables.
Beijer Electronics, MA00670
Safety precautions
Drawings
chapter (S-04597)
1-1
Werbung
