Beijer Electronics IPC-15 Installationsanleitung Seite 21

PCI expansion card
There is room for one PCI card. Fitting the card in the terminal requires an
assembly kit containing a PCI housing, a case, and a covering plate (PCI-kit). It
is possible to fit cards which take up two spaces in the PCI housing.
– Unscrew the six screws and lift off the plate.
– Put the PCI housing in place and secure firmly with two screws. The PCI card
is placed in the holder and secured with a screw in the PCI housing. Use a
covering plate for the other opening if the PCI card uses only one space.
Beijer Electronics, MA00670
Installing expansion cards
1-17