Swing BOULDER Montageanleitung Seite 16

General operating instructions, troubleshooting
Is the fan wobbling or vibrating?
- If the fan wobbles or vibrates excessively, it may be due to the fact that the blades are loose
or unbalanced. In this case, ensure that all the blades are securely fastened to the fan, that
no screws are missing and that all the screws are tightened. Ensure the hanging bracket is
properly installed on the ceiling.
- If necessary, the blades can be balanced using the blade balancing kit, which is included
with the fan.
- If the ceiling fan wobbles in an extreme way – stop using the fan immediately and contact
customer service.
- All blade sets are grouped by weight as a set. Mixing blades from another fan can cause the
fan to wobble and vibrate.
Attention! To prevent long-term damage, it is important to balance the fan as soon as
possible. The balancing of the fan is not covered under warranty.
Maintenance - In order to maintain the appearance of the ceiling fan and its integrity, be sure to clean and
remove dust periodically (using nonabrasive detergents). Accumulation of dust and dirt is
not aesthetic and will lower the fans performance.
- Due to the fans natural movement some connections may become loose overtime. Check
the fans connections, blades and tighten screws if needed. (Not necessary to remove the fan
from the ceiling to perform)
Fan Installation Instructions | Version 1.25
16 SWING Boulder