Swing BOULDER Montageanleitung Seite 14

Functions and operation of the remote control
Set fan speed to high
Set fan speed
to medium
Attention!
- The remote control operates wirelessly and must be within a range of up to 8 metres from the fan.
- When changing functions, wait patiently for a few seconds for the fan to receive the transmission and perform
the operation, especially after changing the rotation direction of the blades.
- The remote control comes with a dedicated wall holder which can be installed using two screws.
- The indicator lights are not lit permanently, but are lit for one second, and then go off.
Fan Installation Instructions | Version 1.25
14 SWING Boulder
LED indicator
Set fan speed to low
Switching the fan off
Switching the
light on or off