Battery Status Display; How To Use - Dreame R20 Ultra Benutzerhandbuch

Battery Status Display

EN
1. Battery Status Indicator
Blinking white
Solid white
Off
Charging
Fully charged
Charging
Standby Mode
Fig. D-2
2. Display Screen
The number on the display screen
represents the current battery level in a
percentage during charging. When the
number becomes 100, the battery is fully
charged.
Fig. D-3

How to Use

Display Screen(Vacuuming)
1. Error Icons
Other errors
Roller stuck
Air Duct Blocked
High-temperature Alert
2.
Charging/Low Battery Level Indicator
Blinking red: Battery level ≤ 10%
Pulsing red: Battery level ≤ 10%
(charging)
Pulsing green: Battery level > 10%
(charging)
3. Battery Level Percentage
When the display screen shows "LO", it
indicates that the battery level is lower
than 10%.
4
4. Suction Level/Dust Level
Suction Level:
Eco
Auto
Turbo
Note: Factory default setting is the Eco
mode.
Dust Level
Red: High
Orange: Med
Green: Low
Note: The color of fan-shaped icon
changes with the amount of dust in real
time (only in Auto Mode).
5. Suction Level Switch
Press the button to switch levels between
auto, eco and turbo.
6. Standby Button
Press briefly to turn on/off.
Fig. E-1
Note:
• If there is no operation for more than 15
seconds, the screen will turn off, and it
will return to the main interface when lit
up again.
• If the vacuum is not working properly,
the screen display will show an
error message. Please refer to the
troubleshooting table to find your
solution.