Care & Maintenance - Dreame R20 Ultra Benutzerhandbuch

Using Different Accessories
Multi-Surface Brush
When the appliance starts, the lights in
front of the brush roller will automatically
turn on, which is convenient for use.
Note:
- When using on baby play mats, carpets
or for vacuuming coffee beans, pop corn
and other pellets, turn on the switch on
the brush.
- When vacuuming on tiles, wooden floors
or other hard surfaces, turn off the switch.
Fig. E-2
Motorized Mini-Brush
For vacuuming dirt, pet hair, and other
stubborn debris from sofas, bedding,
and other fabric surfaces. It is not
recommended to vacuum on fragile
surfaces, such as silk.
Fig. E-3
Combination Tool
Suitable for vacuuming cracks, corners
of doors and windows, stairs, and other
hard-to-reach places.
Fig. E-4
Soft Dusting Brush
Suitable for vacuuming on LCDs,
keyboards, lampshades, curtains, shutters
and other surfaces of fragile objects.
Fig. E-5
Care & Maintenance
Tips:
• Always use genuine parts to keep your
warranty from being void.
• If the filter or nozzle becomes clogged,
the vacuum will stop working shortly
after being turned on. Clear the tube to
restore functionality.
• Before cleaning the dust cup, please
confirm that the plug is disconnected
and keep the vacuum's standby button
in the off position.
• If the vacuum is not used for an
extended period, fully charge it, unplug
the power cord, remove the battery,
and store it in a cool, low-humidity
environment away from direct sunlight.
To avoid over-discharging the battery,
recharge the battery at least once every
three months.
Cleaning the Vacuum
Wipe the vacuum with a soft dry cloth.
Cleaning the Dust Cup, Pre-
Filter, and Cyclone Assembly
1. Press the dust cup bottom cover release
button, then empty the contents.
Fig. F-1
2. Press the dust cup release button and
remove it from the vacuum.
Fig. F-2
3. Remove the pre-filter first, and then
rotate the cyclone system to lift it out.
Fig. F-3
4. Rinse the cyclone assembly, pre-filter,
and dust cup until they are clean. After
washing, air dry for at least 24 hours.
Fig. F-4
Note:
• Please clean the dust cup as needed.
• It is recommended to clean the cyclone
EN
5